The raw materials used in molded pulp today are mainly wood fiber, sugarcane fiber, bamboo fiber and recycled paper pulp.
HTAeco's wet-press packaging is made from sugarcane fiber and bamboo fiber, because the length of these two fibers suits wet-press molded pulp production very well. HTAeco is also exploring the addition of agricultural fibers such as coffee grounds, tea leaves, flower petals and tobacco leaves into the pulp, to extend the value of these agricultural fibers.
Fiber length approx. 0.6-0.8 mm. The fibers are relatively short, with good absorbency and flexibility.
Derived from a by-product of industrial sugar production: after sugar extraction, the bagasse is cooked and defibered, washed and screened, and refined, then finally made into pulp board,a sustainable raw material.
Fiber length approx. 1.5-2 mm. Strong inter-fiber bonding and high tensile strength.
Derived from dedicated fast-growing bamboo plantations with a short growth cycle, harvestable in rotation within a few years. FSC classifies bamboo as a non-timber forest product (NTFP), yet bamboo pulp may carry the FSC label once both the upstream bamboo forest and the chain of custody are certified.
HTAeco blends these two sustainable plant fibers in set proportions, and the hot-pressed wet-press molded pulp products combine smoothness with stiffness.
The tree species used for molded pulp production are mainly softwoods. For example, the fiber length of Ust-Ilimsk softwood pulp is about 2.42-2.78 mm, while Silver Star pulp averages about 2.15 mm.
Under the EUDR, wood fiber falls within the EUDR wood-related categories and requires complete documentation on harvesting permits, forest land ownership, plot coordinates and deforestation-free verification. Bamboo, by contrast, is explicitly excluded from the EUDR wood species scope, and sugarcane is not a category listed under the EUDR, so neither material requires forest-land traceability.
Beyond the two base fibers, sugarcane and bamboo, we are also exploring the inclusion of more natural plant fibers in the pulp, such as tobacco leaves and coffee grounds.
By adjusting the concentration of these fibers in the molded pulp furnish, different surface effects are achieved.
This brings agricultural residual fibers of previously limited value back into the packaging material system and extends their usefulness. At the same time, these natural fibers create distinctive visual and tactile memory points that reflect the brand's character.