HTA-Pulp molding packaging box post-processing process, what do you know?

Post-Processing Processes for HTA-Pulp Molding Packaging Boxes: What You Need to Know

POST PACKAGING

PROCESSPost-packaging process

As the world's environmental problems become increasingly severe, people's demand for environmentally friendly packaging is becoming stronger and stronger. They not only require high-end and exquisite packaging design, but also require it to have certain environmental protection performance and personalized appearance.

HTA Environmental Technology adheres to the concept of "green earth and environmentally friendly future" to create environmentally friendly packaging products. On the basis of using new environmentally friendly materials, it empowers new packaging processes, which not only improves the artistic effect and added value of packaging, but also satisfies consumers at different levels. needs!

This article will share with you eight common post-packaging processes for new environmentally friendly materials!

Hot stamping

Hot stamping is widely used in the printing industry and is a very mature process for pulp molded products. The principle of hot stamping is to heat the mold, and then transfer the gold material on the gold paper to the pulp molding. The advantage of this process is that the process is mature and the cost is not high, but the color selection is relatively monotonous.

If there are too many colors, it will take a long time to hot stamp in batches. Aluminum foil paper used for hot stamping can be of various colors (common colors include gold, silver, black, red, etc.). Flat products are very suitable for hot stamping. logos and patterns.

UV printing

The advantage of UV printing is that it is efficient and fast, especially for proofing without publishing. It simplifies the processing of other processes and equipment and can highly restore various colors.

UV can print various documents in four colors, and HTA can print three-dimensional products including curved surfaces. The disadvantage is that mass production efficiency is slow and the cost is high.

Screen printing

Screen printing is a relatively traditional process in China. It uses the principle of the screen to print ink onto the product through leakage printing. The advantage is that the printed color is rich.

However, the disadvantage of silk screen printing is that currently it can only print single colors. If multiple colors are used, multiple printings are required, which will greatly increase the production cost. Therefore, screen printing technology is mostly used for printing on flat packaging.

Envelope

Envelopes are a more commonly used method in paper-plastic molded boxes. HTA can print product information on degradable paper, and can perform various processes on the envelopes, which not only plays the role of information display but also The function of sealing.

Sticker

The advantage of stickers is that the pattern, color, and craftsmanship of any product can be made on the stickers, and then affixed to our HTA pulp molded boxes. The advantage is that it is easy to restore more colors.

However, it has two disadvantages. One is that the cost of manual labeling is relatively high. Automatic labeling can reduce costs. In addition, if it covers the entire surface of the product, it is easy not to see the material of the entire surface, thus affecting the overall product packaging. Display of results.

Crystal mark

HTA's crystal label is another form of sticker technology. Its method is to print the pattern on the A film and then cover it with the B film. The film crystal label solves many pain points in printing, is easy to use, and has better High gloss and strong three-dimensional effect. Crystal marking is a transfer method that removes the film and leaves words. The crystal marking process is suitable for logos and a small amount of important information.

Gaudí

HTA's Gaudí process is different from traditional UV and hot stamping processes in terms of expressiveness, mainly in its brighter brightness, higher height, and texture details. It is crystal clear and translucent like water drops dripping on the printing surface.

It also has expressions of different densities and gradients, which can well simulate veins, borders and other textures similar to plants. The Gaudi anti-oxidation can keep crystal clear for a long time.

Mixing process

If you feel that only one of the above processes is a bit monotonous on the packaging, you can also mix and match the above processes according to the needs of the product. For pulp molding, a proper amount of hot stamping and local stickers can be used for a variety of processes. deal with.

For example, the combined use of Visual Gaudi, UV printing and other processes can not only display product information more vividly, but partial stickers can also show the material properties of pulp molding.

Environmentally friendly packaging materials are a new material that will be widely used in the future. Products that combine natural environmentally friendly materials with sophisticated packaging will surely be favored by more brands and consumers!

HTA has more than ten years of R&D experience in 100% degradable packaging technology, covering the fields of high-end gifts, smart home appliances, medical care, home daily necessities, energy packaging, etc., and is committed to building a leading brand of high-end pulp molding products experts!